The vinyl is one of the easiest siding materials to install, in this blog we will try to guide you through the process. This is where we are going to share with you 5 vinyl siding installation tips, so be prepared to learn. We know that such work needs skill and experience, so we will try to transmit our experience here.
You must be careful if the coating is not installed correctly, you run the risk of water leaks. If the water seeps you will suffer from pests and in a short time you will have them everywhere, so you must follow this guide to the letter. We are here to help you avoid mistakes.
There are many types of starter strips, you must be careful when choosing. We recommend you use a starter strip of 3-1 / 2 “When you start installing everything you should make sure that at least 1” of the tape is left over the top of the foundation of the house. the foundations with the start band, this way you will protect the house against the climatic changes.
A well-installed liner should be level. Everything will work well if it is level, the material will also be easily activated. We advise you to adjust the chalk line around your house, this is where the first run of the siding will be made.
Sometimes it is normal for the vinyl siding to move after being installed, which is why we recommend you leave space for it to fit. This will serve you during the summer months, so you avoid the lining to bend.
Do not use a saw blade with teeth or you will damage all the material. Our advice is to use a special vinyl sheet. This type of instrument places the teeth backward, thus ensuring a smooth cut.
You must select the galvanized nails to ensure a firm coating, this will help the material to support the climate changes. We recommend that the nails measure at least two inches long.
Preparation gives you gorgeous and fabulous results to your vinyl siding. That is why we added it to our list of vinyl siding installation tips.
There are many things to consider before installing vinyl siding. One thing to know is what material you should avoid with underlayment. You should always avoid using wood when it comes to the underlayment, as it tends to be vulnerable to pests and moisture.
We also recommend that before the installation, you should flash your walls. Flashing before the vinyl siding helps keep water out of your house.
Lastly, consider applying a weather-resistant barrier. A weather-resistant barrier helps control moisture and shed water out.
Besides preparation, you must do something before installing your vinyl siding. One of our vinyl siding installation tips is adding accessories before the actual siding. Some of these accessories include corner posts, starter strips, trim, and J-channels.
By adding these accessories first, you make sure that the vinyl siding installation will come out smoothly. To begin with, starter strips go first in the bottom, aligned with the chalk line. When nailing the starter strips, remember to nail in the middle of the nail space, nailing at a distance between 8 to 12 inches. Also, remember to leave a small space between each starter strip.
With corner posts, remember to cap them first. This will save you from the trouble of pests that like to make it into people’s homes. To cap them, start off by cutting some inches of the J-channel. You will them fold back what remains and hit it gently with your hammer to create a crease.
Always keep in mind that every accessory needs to be leveled up. This will help you make sure that you end up with flawless results.